Products
Customise Freight Elevator Hydraulic Car Hoist for Basement
Rail lift
1. customized car elevator
2. loading car or goods
3. hydraulic drive and chain lifting
4. stop at any floor according to the setup
5. optional decoration, such as aluminum plate
Specification
|
Pit length |
6000mm |
|
Pit width |
3000mm |
|
Platform width |
2500mm |
|
Loading capacity |
3000kg |
Note
1.At least the greatest possible car height + 5 cm.
2.Ventilation in the lift shaft is to be provided on site. For the exact dimensions, please contact us.
3.Equipotential bonding from the foundation earth connection to the system (on site).
4.Drainage pit : 50 x 50 x 50 cm, installation of a sump pump (see manufacturer's instructions). Please contact us before determining the location of the pump sump.
5.No fillets/haunches are possible at the transition from the pit floor to the walls. If fillets/haunches are required, the systems must be narrower or the pits wider.
Elevator position
Elevator with garage door
Driveway
The maximum access inclines specified in the symbol sketch must not be exceeded.
If the access road is incorrectly executed, there will be considerable difficulties when entering the facility, for which Cherish is not responsible.
Detail construction - hydraulic & electric unit
The space in which the hydraulic power unit and electrical panel will be housed should be carefully selected and easily accessible from the outside. It is recommended to close this room with a door.
■ Shaft pit and machine room are to be provided with an oil-resistant coating.
■ The technical room must have adequate ventilation to prevent the electric motor and hydraulic oil from overheating. (<50°C).
■ Please pay attention to the PVC pipe for the correct stowage of the cables.
■ Two empty pipes with a minimum diameter of 100 mm must be provided for the lines from the control cabinet to the technical pit. Avoid bends of >90°.
■ When positioning the control cabinet and the hydraulic unit, take the specified dimensions into account and ensure there is sufficient space in front of the control cabinet to ensure easy maintenance.
